The challenge of implementing water harvesting and reuse in South Australian towns (2024)

Related Papers

Urban Water Conservation, Harvesting, and Reuse Ñ South Australian Case Studies

2001 •

Paul Downton

South Australia has a relatively long history of innovation in wastewater treatment and water conservation, spurred on by response to its predominantly arid environment. Examples of innovation range from those in private sector developments in inner-city contexts to suburban community projects. Treatment systems range from mechanical filtration to extensive reedbeds. Storage approaches include underground tanks and aquifer recharge. Most of the projects link water treatment to vegetation establishment as part of broader urban planning strategies.

View PDF

Proceedings of the Water Environment Federation

Rainwater Harvesting and Urban Design in Australia

2012 •

Mahala McLindin

Australia has recently emerged from the worst drought on record. The so-called “Millennium Drought” has triggered a widespread change in water management approaches and practices. This paper outlines recent developments in rainwater harvesting and urban design in Australia and covers some of the key issues that need to be considered in the design and implementation of rainwater harvesting as an alternative source of urban water supply.

View PDF

Harvesting the Urban Catchment in Warrnambool and Renton

Murray Dancey

The Warrnambool Roof Water Harvesting Scheme is an innovative Integrated Water Resource Management (IWRM) project for alternative water source adoption. The review indicates that the project is the only large scale operational hybrid roof water harvesting scheme in the world and therefore provides an excellent case study of the threats and opportunities provided by this innovative scheme. The projects gestation over more than seven years is reviewed and its compatibility with the principles of IWRM are assessed as well as an analysis of key indices from datasets is provided. The RWHS produced a framework and methodology to assess some of the costs and benefits of a comparable system and the results of this analysis is provided and reviewed. The city of Renton, Washington, United States of America has been selected as a candidate for a desktop analysis of the suitability for a RWHS system. The review of the city of Renton shows that while household water efficiency has enormous scope for improvement, a RWHS proposal for a new residential development could lead to substantial reductions in supply from traditional catchments. This review indicates that for cities with relatively high rainfall (> 700mm/y) a hybrid RWHS provides a compelling case for innovative and step-change IWRM practice.

View PDF

Resources, Conservation and Recycling

Rainwater harvesting in Greater Sydney: Water savings, reliability and economic benefits

2012 •

Monzur Imteaz

View PDF

Performance of Cluster Scale Rainwater Harvesting Systems: Analysis of Residential and Commercial Development Case Studies

View PDF

Piantadosi, J., Anderssen, R.S. and Boland J. (eds) MODSIM2013, 20th International Congress on Modelling and Simulation

Regionalisation of water savings from rainwater harvesting system in Greater Sydney

Upeka Kuruppu

View PDF

Assessing integrated water management options for urban developments–Canberra case study

2008 •

Stephen Gray, A. Sharma

View PDF

Water

Assessing the Impacts of Climate Change on Rainwater Harvesting: A Case Study for Eight Australian Capital Cities

preeti preeti

Due to climate change, freshwater supply will be limited at many locations around the globe. Rainwater harvesting (RWH) has emerged as an alternative and sustainable freshwater source. In this study, the impacts of climate change on water saving as well as the reliability of a RWH system are investigated using data from eight Australian capital cities. Both historical and projected rainfall data were incorporated into a daily water balance model to evaluate the performance of a RWH system in relation to its reliability, water savings and scarcity. Indoor (toilet and laundry), outdoor (irrigation) and combined (indoor plus outdoor) water demands were considered for a 5 m3 tank size. It has been found that in the future period, the water savings and reliability of a RWH system will reduce slightly across the selected cities. Different capital cities of Australia will experience different level of performance for a RWH system depending on their locations, water uses and seasons. The fi...

View PDF

Conservation Ecology

Adaptive Management of the Water Cycle on the Urban Fringe: Three Australian Case Studies

1999 •

A. Gilmour

View PDF

Towards Sustainable Water Strategies in the Perth Region of Western Australia: Inclusion of Decentralised Options

2000 •

Peter Coombes

This study presents the impact of including decentralised rainwater harvesting, water efficient appliances and wastewater reuse strategies in analysis of the operation of regional water supply systems. These strategies provide significant reduction in regional water demand, improvement in regional water security, decreases in greenhouse gas emissions and economic benefits. A compelling case has been made for the inclusion of decentralised

View PDF
The challenge of implementing water harvesting and reuse in South Australian towns (2024)

FAQs

What are the principles of water harvesting? ›

The basic principle of water harvesting is to capture precipitation falling in one area and transfer it to another, thereby increasing the amount of water available in the latter.

Is harvesting rainwater bad for the environment? ›

Water harvesting is a simple and sustainable way to protect our planet's natural resources and delicate ecosystems. When you use harvested rainwater, you conserve groundwater, save energy, limit the damaging effects of stormwater runoff, and bring out the best in our lawns and gardens.

What are the benefits of reusing rainwater? ›

benefits of rainwater reuse
  • Acceptable water quality at minimal cost for many appliances.
  • Aleviates public drainage and water treatment systems.
  • ensures water availability for irrigation during dry spells.
  • Reduces potable water use and reliance on water imports.

What is the theory of water harvesting? ›

Rainwater harvesting (RWH) is the collection and storage of rain, rather than allowing it to run off. Rainwater is collected from a roof-like surface and redirected to a tank, cistern, deep pit (well, shaft, or borehole), aquifer, or a reservoir with percolation, so that it seeps down and restores the ground water.

What is the need to save water through water harvesting? ›

Water harvesting techniques gather water from an area termed the 'catchment area' and channel it to the cropping area or wherever it is required. Conservation techniques conserve water within the biomass and the soil by reducing run-off and keeping the water where it falls, as much as possible.

What is the risk of rain water harvesting? ›

Germs and other contaminants are found in rainwater.

The risk of getting sick from rainwater may be different depending on your location, how frequently it rains, the season, and how you collect and store the rainwater. Dust, smoke, and particles from the air can contaminate rainwater before it lands on your roof.

What are the negative effects of rainwater? ›

Rainwater has both positive and negative effects on our aquifers. The greatest risk posed by rainwater is that it carries pollutants into our water supply. Rain cannot travel through paved surfaces, so it flows over these surfaces and picks up debris, bacteria, pesticides, and other pollutants.

What are 3 disadvantages of rain? ›

Rain has several advantages and disadvantages. Some advantages include providing water for plants, replenishing water sources, and cooling the environment. However, rain can also cause flooding, damage to infrastructure, and increase the risk of diseases.

What are the disadvantages of using rainwater tanks? ›

Some DISADVANTAGES of using rainwater:

A rainwater tank may be costly to purchase and install (especially underground) and will require some maintenance. If rainwater from the tank is supplied using a pump then this will need to be maintained and occasionally repaired or replaced.

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Greg Kuvalis

Last Updated:

Views: 6215

Rating: 4.4 / 5 (55 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Greg Kuvalis

Birthday: 1996-12-20

Address: 53157 Trantow Inlet, Townemouth, FL 92564-0267

Phone: +68218650356656

Job: IT Representative

Hobby: Knitting, Amateur radio, Skiing, Running, Mountain biking, Slacklining, Electronics

Introduction: My name is Greg Kuvalis, I am a witty, spotless, beautiful, charming, delightful, thankful, beautiful person who loves writing and wants to share my knowledge and understanding with you.